Fittings also for oxygen - Push-In & Push-On (PURE)
The PURE version is also suitable for oxygen.
Description
Standard connectors are available in almost all versions.
The PURE series is especially suitable for medical applications and applications with pure oxygen.
The individual parts of the connectors of the PURE series go through a multi-stage cleaning process to remove organic and inorganic contaminants. After cleaning, the components are assembled and then packed airtight to ensure cleanliness during transport and storage until the components are used on site.
All work is carried out in a structurally delimited clean room in accordance with VDA 19 Part 2.
Advantages of the PURE fittings for oxygen
- Traceability through labeling / construction code
- Product purity requirements according to ASTM G93-03, DIN EN ISO 15001 and EIGA Doc 33/18.
- BAM-tested O-rings (FKM) and lubricants
- Airtight and labeled packaging
- Specific purity requirements possible
- All the advantages of the standard push-in fittings:
- secure connection
- low internal volume
- low dead volume
- flexible and comfortable handling
- high durability
- 100% leak test
Specifications
Types
|
Push-In | Push-On (as standard and in PURE version)
|
Materials
|
stainless steel | PVDF | POM | PPSU | nickel-plated brass
|
Sealing material
|
FKM (BAM tested)
|
Temperature range
|
up to 140 ° C (depending on the choice of material)
|
Connection sizes
|
4 | 6 | 8 | 10 | 12 mm (outer diameter)
|
Thread sizes
|
M5 | G1 | 8 | G1 | 4 | G3 | 8 | G1 | 2 | R1 | 8 | R1 | 4 | R3 | 8 | R1 | 2
|
Operating pressure
|
-0.9 bar up to 20 bar (varies according to temperature) (depending on material and medium) |
Purity requirements
|
specific degrees of purity from ≤ 33 mg / m² to ≤ 550 mg / m² possible
|