Push-In Fittings for rigid tubing
for example for PTFE/PFA tubing
These fittings allow the simple connection and disconnection of plastic tubes made of PTFE / PFA (OD Ø2.0mm). The fittings are available for connections with 1/4-28UNF or M6 thread.
The currently available material is PPS with FPM seal.
Read more about these connectors in the technical information.
Push-In connection - Specifications
Working pressure (max.)
|
7.0 bar at 20°C. 4.5 bar at 100°C |
Fluid temperature (max.)
|
100°C
|
The push-in connection can be integrated directly into the valve body at the following valve series:
Downloads
Push-In Fittinge 187 KB