MTV Series - Diaphragm isolation solenoid valve
Orifice diameter 0.8 - 2.0mm
Description
2/2-way and 3/2-way diaphragm isolation solenoid valves with fluid separation.
This series of isolation valves offers various models optimised for their internal volume and holding pressure effect. There are also valves for high-temperature media and for pressures up to 6 bar. Due to their high vacuum suitability on the input side, these valves can also be used in front of the pump on the suction side.
With the ventiduct option, the transfer of heat from the coil to the medium can be almost completely prevented.
Specifications
Type
|
2/2-way normally closed 2/2-way normally open 3/2-way |
Orifice diameter
|
0.8 - 2.0 mm
|
Port connection
|
M6 | 1/4-28UNF | hose barbs | flange
|
Rated voltage
|
12 VDC | 24 VDC other voltages on request |
Operating pressure range
|
input: -1000 - 2000 mbar (special models up to 8000 mbar) output (NC | NO): 0 - 1000 mbar |
Diaphragm material
|
PTFE
|
Body material
|
PEEK | PPS | PTFE | PCTFE | POM | HPVC
|
Seal material
|
Soft-Seal Perfluoroelastomer (FFKM) | FPM
|
Other materials in contact with the medium
|
PTFE Ceramic - AI2O3 | PEEK (for 3/2-way) |
Fluid temperature range
|
0 - 60°C 5 - 60°C (for diaphragm: perfluoroelastomer FFKM) |
Ambient temperature range
|
0 - 60°C 5 - 60°C (for diaphragm: perfluoroelastomer FFKM) |
Power consumption
|
1.9 - 4.4 W (depending on model) |
Operating duration
|
100% ED
|
Mounting direction
|
Any
|
Fluid
|
Resistant to neutral and aggressive liquids / gases (see resistance lists) |
Dimensions
|
Ø26.0 x 57.0 mm
|
Customizable to specific requirements (e.g. higher pressure range, different operating mode, higher temperature range, different operating voltage, different port connections, ...)
Downloads
MTV series data sheet 284 KB