Micro pump unit with osmosis pump - IBP Series
Under development
Description
This pump is based on the electroendosmosis principle and offers outstanding features such as:
- no pulsations
- quiet operation
- small size
- lightweight
- low power consumption
- high pressure up to 10 bar
Linear control of flow rate through the change in voltage.
Optionally battery operable. (Voltage step-up circuit is required)
Internal strcuture
This pumping unit uses an Electroosmotic pump as the pressure source. As shown in the figure, the diaphragm is pressurized from the top by the working fluid, and thus, the liquid to be delivered is pumped out. Suction is also possible by reversing the polarity of the applied voltage when ethanol is used as the working fluid. (Optional Feature)
Working principle
Pulsation free flow
Comparison of pulsation with a syringe pump.
This graph is an example of the features of this product and does not guarantee performance.
Dimensions
Specifications
Power Consumption
|
10 mW
|
Other Wetted Materials
|
PEEK and Silicone
|
Capacity
|
5 mL
|
Flow Rate
|
up to 10 µL/min
|
Discharge Pressure
|
2 bar (optionally up to 10 bar)
|
Weight
|
Approximately 105 g (Excluding Liquid)
|
